"Pro-Drag" front coil over kit sets a new,
higher standard of performance and quality. When we designed our
coil over system, we had two goals in mind. One was to provide the
performance capabilities needed for the toughest drag strips, the second
was to provide the strength and durability required for the demands
of a daily driven vehicle. We're proud to say that we have accomplished
both. If you are looking for the best drag race front coil over
suspension system for the third generation F-Body, you just found it.
Once thought of as
a race only item, coil-over suspensions are now considered the hot
set-up for any highly tuned drag car. The combination of incredible weight
transfer with great ride quality is what one expects from a world
class drag car. With a Spohn "Pro-Drag" coil-over conversion
kit you will have the no-compromise performance you demand without
paying a penalty in comfort.
The "Pro-Drag" coil over system uses an extremely long
(14"), yet extremely light (175#) spring for the most stored spring
energy possible, providing tremendous weight transfer and an incredible
launch. With the design of our system, we can use this extremely long
spring, yet still allow for over 1" of ride height lowering.
Warning!
All coil-over kits are not created equal. Compare the features of our
kit with any other manufacturer's kit and you'll quickly see the
differences. Careful attention to detail by our design team is why
the Spohn coil over kit avoids the design pitfalls of others. You can
always depend on Spohn Performance to provide you with the best parts
for your F-Body!
Other coil over kits on the market use a top spring hat mounted
against the stock upper strut mount. This places the entire weight of
the front of the car on to the stock strut mount. With street driving
and vehicle loads, these systems cause the stock strut mounts to
distort, bend, and fatigue, ending in parts failure. The Spohn
"Pro-Drag" front coil over system includes our fabricated
steel spherical upper strut mounts combined with a lower
reinforcement plate that totally sandwiches and reinforces the entire
strut tower.
Fabricated Steel
Spherical Upper Strut Mount Specifications:
