Made of 5052 aluminum and powder coated black, this high
quality intercooler scoop can be raised out of harms way for street use or
lowered to it widest opening for optimum performance in just minutes by
loosening only two bolts. At the street setting, the lowest edge of the scoop
extends slightly below the factory dams, so contact with most curbs should not
be a problem. At the race setting, the scoop extends 3" below the dam and
has an opening of almost 5-3/4" for maximum air intake. Mounting hardware
included.
NOTE! THESE WERE
DESIGNED TO BE USED WITH A STOCK INTERCOOLER ONLY! IF YOU WANT TO USE IT
WITH A STRETCHED STOCK LOCATION INTERCOOLER YOU WILL NEED TO DO SOME FABRICATION
TO IT TO WORK.
