|
|
UCAs
- Adj. w/ Poly Bushings Extended Length
Item: 634-EL
$195 to $235
|
|
|
1978-1996
GM B-Body:
|
|
|
|
Chevrolet:
Caprice, Impala SS
|
|
Buick:
Roadmaster, LeSabre
|
|
Pontiac:
Bonneville, Catalina
|
Our tubular rear upper control arms outperform the
flexible, stamped-steel arms and soft rubber bushings that come
from the factory. Eliminate wheelhop and increase traction with an
easy bolt on installation. All ends are fitted with grease
fittings for easy lubrication of the fluted polyurethane bushings.
Adjustability feature allows for setting the pinion angle. Our
right hand and left hand threaded CNC machined double male stud
adjuster allows for easy on-car adjustments, no need to
unmount the control arm to make adjustments!
Available powder coated bright red or gloss black.
Specifications:
 | Polyurethane bushed (fluted) ends
equipped with grease fittings for easy lubrication.
| Right hand and left hand threaded CNC machined and silver
zinc coated double male stud adjuster threads into 4130
chrome moly TIG welded threaded tube adapters.
| | 1/4" CNC cut and formed steel mounting brackets
| Re-uses OEM mounting hardware, no need to
drill out your car's mounting bracket holes.
| These are the highest quality,
easiest to adjust on the car upper
control arms on the market!
| Available powder coated your choice of
bright red or gloss black for a durable and brilliant finish.
|
| | | |
Now Available: The ultimate
in bullet-proof lightweight strength, 100% TIG welded
chrome moly construction! Same as above, but constructed entirely
from 4130 chrome moly tubing. Make your choice below.
NOTE:
These upper control arms have a 3/4" extended length to
properly center the wheel in the wheel well. Use with our extended
rear lower control arms.
|
 OPTIONAL POLY REAREND HOUSING
BUSHING KIT
|
B-Body
Rear Upper Control Arms Extended Length $195.00-$235.00
Order below!
|
You may also be interested in...
|
Upper
Control Arm Hardware Kit
Item: 975
$12.95
|
|
|
1978-1987
GM G-Body:
|
|
|
|
Buick:
Regal, Grand National
|
|
Oldsmobile:
Cutlass
|
|
Chevrolet:Monte
Carlo,
Malibu,
El Camino
|
|
Pontiac:
Grand Prix
|
Don't use your old rusty mounting bolts when installing
aftermarket rear upper control arms
(if you
managed to get the nuts off without breaking the bolts!).
Our rear upper control arm mounting hardware
kit includes:
(2) 12mm Grade 10.9 bolts (silver zinc plated)
(2) 14mm Grade 10.9 bolts (silver zinc plated)
(2) 12mm steel lock nuts (silver zinc plated)
(2) 14mm steel lock nuts (silver zinc plated)
(2) 12mm flat washers (silver zinc plated)
(2) 14mm flat washers (silver zinc plated)
|
BACK TO B-BODY SUSPENSION PARTS
PAGE
|
