Repositions your instant center by lowering your control arm angle
for increased traction and anti-squat. Lowers rear of control arm up to
3". This product is a must for lowered vehicles to correct your
suspension geometry. Lowering your vehicle alters the LCA angle putting
the rear of the LCA higher than the front of the LCA, this causes
massive wheel hop and traction loss.
NON-LOWERED vehicles will also see a dramatic increase in
traction by lowering the rearward angle of the LCA with our relocation
brackets. The lower mount holes are placed in the arc pattern of the OEM
length LCA. Therefore allowing a non-lowered F-Body to drop the rear LCA
angle and NOT require a longer than OEM LCA. All geometry is correctly
maintained. The anti-squat performance is providing most users
with a full .10 or better 60' reduction!
Brackets are Laser-Cut from 3/16" cold rolled
steel using state-of-the-art CAD/CAM technology for precision
tolerances. Must be welded into place. Hardware is
included. Since the brackets must be welded in place, we ship them bare.
Weld in LCA Relocation Brackets are the only SAFE and EFFECTIVE
way to install them.
Note:
