Additional shipping charges
may apply to Hawaii and Alaska orders
SPOHN
Tubular
A-Arms w/rod ends/coil-over mount (78-87)
Item: 753
$525 to $625
QA-1 Coil Over Shocks Available Separately!
These control arms will NOT work with stock coil
springs.
Spohn Performance's
front control arms set a new, higher standard of performance and
quality. When we designed our a-arms, we had two goals in mind. One
was to provide the performance capabilities needed for the toughest race
tracks, the second was to provide the strength and durability required for
the demands of a daily driven vehicle. We're proud to say that we have
accomplished both. If you are looking for the "cheapest"
a-arms, we don't have them. If you are looking for the best front
suspension components for your G-Body, you just found them.
Spohn front control
arms are a true "A" arm rather than a "V" arm. This
provides maximum rigidity and equalizes forces delivered in to the
frame. Spohn control arms are gusseted in critical areas to ensure
that a weld never breaks. They decrease overall
weight, and more importantly - "unsprung" weight.
These a-arms are equipped with a coil over mounting platform
specifically designed for use with the QA1 Pro-Coil System. These
a-arms have no provision for mounting the stock coil spring. If
you are going to be running the QA1 Pro-Coil system, this is the
trickest set-up available!!
Build
Specifications:
1.25" x
.120" wall seamless DOM tubing
Ball joint cups
are CNC machined from 2.75" o.d. x .375" wall seamless
mechanical tubing
CNC cut and formed 7 gauge coil over mounting platform
QA1 3/4" chrome-moly spherical rod ends with
Teflon®/Kevlar® self lubricating race
Rod ends allow additional alignment adjustability
CNC machined through sleeve and zinc coated spacers keep rod
ends perfectly centered inside of the mounting brackets
Formed
.125" sway bar end link mounts
Durable and brilliant powder coated finish
Fully assembled and ready to install
STRONGER, yet
LIGHTER than stock!
Now Available: The ultimate in bullet-proof
lightweight strength, 100% TIG welded 4130 chrome moly
construction! Same as above, but constructed entirely from 1.25" x
.095" 4130N chrome moly tubing. Make your choice below.
Priced per pair -- Qty. 1 = 1 Pair
G-Body
Front Lower Control Arms $525 to $625
For QA-1 Coil Over Shocks Order below!
SELECT YOUR
FRONT
CONTROL ARMS FROM THE
DROP DOWN MENU BELOW
You may also be interested in...
LCA
Mounting Hardware Kit (G)
Item: 980G
$15.00
1978-1987
GM G-Body:
Buick:
Regal, Grand National
Oldsmobile:
Cutlass
Chevrolet:Monte
Carlo, Malibu, El
Camino
Pontiac:
Grand Prix
Don't use your old rusty mounting bolts when installing
aftermarket lower control arms (if you managed to get the nuts
off without breaking the bolts!).
Our lower control arm mounting hardware kit includes:
TR Custom Parts
141 Ezra St
North Haven CT 06473 We
do all correspondence by email! mhueffman@snet.net
Site updated -
3/31/2012
ACCEPTING
MASTERCARD/VISA & DISCOVER CREDIT CARDS DIRECTLY ON OUR SECURE
SHOPPING CART IN ADDITION TO PAYPAL AND MONEY ORDERS.
EFFECTIVE
IMMEDIATELY! ORDERS WILL ONLY BE SHIPPED TO
BILLING ADDRESSES
NO EXCEPTIONS!
DUE
TO COMPLAINTS ABOUT THE HIGH COST OF SHIPPING TO
CANADA WE WILL NO LONGER BE SHIPPING THERE!
SORRY
This
is a part time business venture. Due to very limited
time we prefer to do all business by email. Our phone
number is NOT listed on the site. All emails about
ordering and questions about our custom parts will be
answered on a timely basis. Be sure to read our ordering/shipping
page for details about how things work around here!
G-Body
Front Lower Control Arms $525 to $625
