Just redesigned to
allow even easier installation AND now will fit with 17" width
Kirkey seats. This seat bracket solves the problem of how to mount Kirkey
aluminum racing seats. No need to fab up any brackets, just bolt
in and go! One less headache when modifying your G-Body for all
out racing.
These
brackets have provisions to be bolted into the OEM studs (on the floor)
in three different positions. Seats
are mounted by bolting directly through the sides of these brackets.
Bolting the aluminum seats through the side bolsters and seat
bracket is the most effective way to mount an aluminum Kirkey seat.
This method places the seat to the bracket in shear, which is the
strongest way to mount the aluminum Kirkey seats.
The
design allows for more position adjustability than the factory seat
slides allow. For example
the seat can be mounted further forward, rearward, lower, or higher than
the factory seat.
For
installation place the brackets into the car.
Bolt them down. Then
place the seat into the bracket. Determine if the seat brackets needs
moved forward or rearward. Adjust
if necessary. The seat can
be moved all over, forward, rearward, up, down to get perfect
positioning for the driver. Once
that perfect position is determined mark the location of the seat to the
bracket. Remove everything.
Then drill holes and bolt the seats to the brackets.
Be
sure to select the proper size brackets for your seats from the drop
down menu. NOTE! We do NOT supply or carry the seats
themselves. Just the seat brackets.
These are designed to fit the Kirkey pro street
drag seats (41 series)
The 16” hip width seat uses their own bracket.
They fit the Kirkey part number 41500 (16” hip)
The other brackets fit both the 17” and 18”
Kirkey part number 41700 for 17” hip width
Kirkey part number 41900 for 18” hip width.
Will also fit #55
series new style seats!
Kit
price includes brackets
for TWO Seats
Single
drivers seat also available
